Schedule B

Back To Menu
logo-bw-icon

LOCAL 138 INTERNATIONAL UNION OF OPERATING ENGINEERS

SCHEDULE B Building Construction

WAGE SCHEDULE EFFECTIVE DATE
JUNE 1, 2024 to MAY 31, 2025

UNION OFFICE ­(631) 694-2480 EXT. 1
WELFARE FUND (631) 694-2140 EXT. 2
STAMP FUND (631) 694-2478 EXT. 3

GREASE TIME RATE SINGULARLY OPERATED MACHINES

Period JUNE 1, 2024 to MAY 31, 2025

BUILDING CONSTRUCTION DIVISION
LOCAL 138 OPERATING ENGINEERS
WAGE
AA – Crane Rate 52.34
A – Rate 43.71
B – Rate 41.54
C – Rate 40.08
D – Rate 37.15
E – Rate 35.69

STAMP VALUE

1/2 – GT $13.15

WAGE DEDUCTION

 

 1/2 GT
DUES 0.74
VACATION 2.00
LEGAL 0.00
PAC 0.04
DOPS 0.07
2.85

LOCAL 138 INTERNATIONAL UNION OF OPERATING ENGINEERS

WAGE SCHEDULE: JUNE 1, 2024 to MAY 31, 2025

SCHEDULE B Building Construction

The rates shown in this schedule represent the rates of wages effective June 1, 2024 to be paid for the listed classification from start to finish of the job, for forty (40) hours a week in accordance with Article VIII, IX, X Section 1 of the Collective Bargaining Agreement effective June 1, 2024.

THE FOLLOWING AMOUNTS ARE DEDUCTED FROM WAGES FOR EACH HOUR OF WORK AND ARE INCLUDED IN THE RATE CLASSIFICATIONS:

Note: Table scrolls right to left if needed

Regular
Time		 1/2 GT Overtime 1/2 OT
DUES CHECKOFF 2.84 0.735 2.84 1.42
VACATION 6.50 2.00 13.00 6.50
LEGAL FUND 0.10 0.00 0.00 0.00
POLITICAL ACTION 0.10 0.04 0.10 0.05
DEFENSE ORG 0.15 0.075 0.15 0.08
TOTAL 9.69 2.85 16.09 8.05
AA - RATES
    • ABI MACHINE – (150,000lbs and over) PLUS OILER
    • ABI MACHINE – (149,999 lbs and UNDER when driving steel sheet piles)*
    • ALL CRANES / CHERRYPICKERS (GREATER THAN 75 TONS) PLUS OILER
    • ALL CRANES / CHERRYPICKERS – (UNDER 75 TONS)*
    • DERRICK – PLUS OILER
    • DRAGLINE, DREDGELINE – PLUS OILER
    • CRANE, CRAWLER – PLUS OILER
    • TOWER CRANE (1st TOWER) – PLUS OILER
    • TOWER CRANE (2nd TOWER OR MORE) PLUS OILER PLUS MAINTENANCE MAN
    • PILE DRIVER – PLUS OILER

Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.

Climb time for Tower Crane is as follows:

  1. Up to 100 ft. – 15 minutes up and down (30 minutes overtime)
  2. Over 100 ft. – 30 minutes up and down (1 hour overtime)

AA-Crane Rates

1-Hour 8-Hour Weekly
93.08 744.64 3,723.20

Overtime Rates

1/2-Hour 1-Hour
93.08 186.16
A - RATES
  • ABI MACHINE – (149,999 lbs and under when used for Auger and Drilling)*
  • ASPHALT SPREADER – PLUS OILER
  • BACKHOE CRAWLER (360 SWING) (150,000 LBS. AND OVER) PLUS OILER
  • BACKHOE CRAWLER *(360 SWING) (UP TO 150,000 LBS)
  • BARRIER MACHINE
  • CMI or MAXIM SPREADER
  • CONCRETE PUMP*
  • DIRECTIONAL BORING *
  • GRADALL*
  • GRADER *
  • HOIST, 3 DRUM OR MULTI-PLATFORM
  • LASER SCREED *
  • LOADING MACHINE (BUCKET) CAP, OF 10 YDS OR OVER *
  • LONG LINETRUCK
  • MILLING MACHINE, LARGE- PLUS OILER
  • PIPELINE WELDER
  • PLANT ENGINEER *
  • POWER WINCH, STONE SETTING/STRUCTURAL STEEL
  • POWERHOUSE
  • SCOOP, CARRY-ALL, SCRAPER IN TANDEM *
  • SIDEBOOM TRACTOR *
  • SIDEBOOM TRACTOR, USED IN TANK WORK *
  • SPECIAL TRACK ALIGNMENT MACHINE *
  • STONE SPREADER, SELF PROPELLED *
  • STRIPING MACHINE (LONG LINE/TRUCK MOUNTED)
  • TANK WORK*
  • TIGER CAT (ASPHALT & CONCRETE CUTTING)*
  • TREE GRABLE *
  • VERMEER ROCK CUTTER*

* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.

A-Rates

1-Hour 8-Hour Weekly
77.79 622.32 3,111.60

Overtime Rates

1/2-Hour 1-Hour
77.79 155.58
B - RATES
  • BACKHOE * OTHER THAN 360 DEGREES
  • BELT SCRETE
  • BULLDOZER *
  • BOOM TRUCK
  • BORING MACHINE/AUGER
  • CHERRYPICKER (LESS THAN 75 TONS) *
  • CONVEYOR, MULTI
  • CURB MACHINE, ASPHALT OR CONCRETE
  • DINKY LOCOMOTIVE
  • DRILL RIG FOR DOWELS
  • FIELD MECHANIC
  • FORK LIFT *
  • HOIST, 2 DRUM
  • LOADING MACHINE *
  • LOADING MACHINE, FRONT END *
  • MECHANICAL COMPACTORS, MACHINE DRAWN *
  • MULCH MACHINE, MACHINE-FED
  • POST HOLE/AUGER
  • POWER WINCH, OTHER THAN/STRUCTURAL STEEL
  • PUMP, HYDRAULIC, WITH BORING MACHINE
  • ROLLER, ASPHALT *
  • SCOOP, CARRYALL, SCRAPER *
  • SKID LOADER/SKID STEER *
  • TRENCHING MACHINE *
  • VERMEER MACHINE *
  • WORKBOAT AND INSPECTION BOAT

* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.

B-Rates

1-HOUR 8-HOUR WEEKLY
73.91 591.28 2,965.40

Overtime Rates

1/2 Hour 1 Hour
73.91 147.82
C - RATES

* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.

  • CONCRETE FINISHING MACHINE*
  • CONCRETE SAW
  • CONCRETE SPREADER
  • DIRT ROLLER *
  • HOIST, (1 DRUM)
  • INTERIOR HOIST
  • OILER TRUCK CRANE (PILE WORK)
  • POWER BROOM *
  • SMALL MILLING MACHINE *
  • VACTOR TRUCK
  • VAC-ALL

C-Rates

1-HOUR 8-HOUR WEEKLY
71.33 570.64 2,853.20

Overtime Rates

1/2 Hour 1 Hour
71.33 142.66
D - RATES
* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.
  • BOILER (THERMOPLASTIC)
  • CONCRETE BREAKER *
  • CONVEYOR
  • CURING MACHINE
  • DETAIL TRUCK
  • FIREMAN
  • FORK LIFT, WALK BEHIND, POWER OPERATED *
  • GENERATOR
  • GRINDER
  • HYDRA HAMMER *
  • MAINTENANCE ENGINEER (SMALL EQUIPMENT)
  • MAINTENANCE ENGINEER, (WELL POINT)
  • MAINTENANCE ENGINEER, (WELDING AND BURNING)
  • MECHANICAL, COMPACTORS, HAND OPERATED (FORWARD AND REVERSE) PIN PULLER
  • PORTABLE HEATERS
  • POWER BUGGIES *
  • PULVI MIXER*
  • PUMP, DOUBLE ACTION DIAPHRAGM
  • PUMP 4 INCH AND OVER
  • PUMP, HYDRAULIC
  • PUMP, JET
  • PUMP, SUBMERSIBLE
  • RIDGE CUTTER
  • SHOTBLASTER
  • STRIPING SUPPORT EQUIPMENT
  • TRENCHLESS PIPE REHAB (robotic unit operator, equipment used in the cleaning and television of sewers, closed-circuit television inspection equipment)

D-Rates

1-HOUR 8-HOUR WEEKLY
54.56 436.48 2,182.40

Overtime Rates

1/2 Hour 1 Hour
54.56 109.12
E - RATES

* Items Notated with a bullet get 1/2 hour grease time on singularly operated machines.

  • BATCHING PLANT, ON SITE OF JOB
  • COMPRESSOR
  • COMPRESSOR, STRUCTURAL STEEL COMPRESSOR, 2 OR MORE IN BATTERY
  • GENERATOR, SMALL
  • GROUND HEATER, BOILERS
  • POWER GRINDER
  • MIXER, WITH SKIP *
  • MULCH MACHINE, HAND FED
  • OILER
  • PIPELINE WELDER HELPER
  • POWER WASHER
  • PUMP, UP TO 3 INCHES (second pump)
  • PUMP, GYPSUM
  • PUMP, SINGLE ACTION 1 TO 3 INCHES (second pump) ROOT CUTTER
  • STUMP CHIPPER
  • TRACK TAMPER
  • TRACTOR, TRACK OR WHEEL *
  • TRENCHING MACHINE, HAND
  • WELDING MACHINE
  • WELDING MACHINE, PILE WORK
  • WELDING MACHINE, STRUCTURAL STEEL
  • WORK BOAT, DECKHAND

E-Rates

1-HOUR 8-HOUR WEEKLY
52.29 418.32 2,0291.60

Overtime Rates

1/2-Hour 1-Hour
52.29 104.58
1-HOUR 1-HOUR OT
LEAD ENGINEER 87.38 174.76

EQUIPMENT RATES – OTHER

1.00 Hour Additional CRANE, BOOM LENGTHS 100 FT. (INCLUDE JIB, LESS THAN 150 FT.)
1.50 Hour Additional CRANE, BOOM LENGTHS 150 FT. (INCLUDE JIB, LESS THAN 250 FT.)
2.00 Hour Additional CRANE, BOOM LENGTHS 250 FT. (INCLUDE JIB, LESS THAN 350 FT.)
3.00 Hour Additional CRANE, BOOM LENGTHS 350 FT.

HAZARDOUS WASTE PAY DIFFERENTIAL

LEVEL A – $3.50 PER HOUR OVER MACHINE RATE

LEVEL B – $2.50 PER HOUR OVER MACHINE RATE

LEVEL C – $1.50 PER HOUR OVER MACHINE RATE

F - RATES

OFF ROAD TRUCKS

JUNIOR ENGINEER

F-Rates

1-HOUR 8-HOUR WEEKLY
50.49 403.92 2,019.60

Overtime Rates

1/2-Hour 1-Hour
50.49 100.98

VALUE EFFECTIVE JUNE 2, 2024

Note: Table scrolls right to left if needed

STRAIGHT TIME RATES GT OVERTIME RATES
40-HR 8-HR 1-HR 1/2-HR 1-HR 1/2-HR
Welfare 644.00 128.80 16.10 0.00 0.00 0.00
HRA 120.00 24.00 3.00 0.00 6.00 3.00
Unemp. 54.00 10.80 1.35 0.00 0.00 0.00
Pension 224.00 44.80 5.60 2.80 5.60 2.80
Annuity 480.00 96.00 12.00 7.50 24.00 12.00
App. Tr. 64.00 12.80 1.60 0.00 0.00 0.00
Vac. 260.00 52.00 .6.50 2.00 13.00 6.50
Dues 113.60 22.72 2.84 0.735 2.84 1.42
Legal 4.00 0.80 0.10 0.04 0.00 0.00
Pac 4.00 0.80 0.10 0.04 0.10 0.05
Dops 6.00 1.20 0.15 0.075 0.15 0.08
JIA 20.00 4.00 0.50 0.00 0.50 0.25
MRF 80.00 16.00 2.00 0.00 2.00 1.00
Total 2,073.60 414.72 51.84 13.15 54.19 27.10